Table of Contents
Advertisement
Output
Show Filter (no filter-id specified) — The following table describes the command output for the
command when no filter ID is specified.
Sample Output
A:ALA-48# show filter ipv6
===============================================================================
IP Filters
===============================================================================
Filter-Id Scope
-------------------------------------------------------------------------------
100
200
-------------------------------------------------------------------------------
Num IPv6 filters: 2
===============================================================================
A:ALA-48# show filter ipv6 embedded
================================================
IP Filter embedding
================================================
In
----------------------------------------------------------------------------------
10
20
================================================
A:ALA-48#
7750 SR OS Router Configuration Guide
Label
Filter Id
Scope
Applied
Description
In
From
Priority
Inserted
In
Applied Description
Template
Yes
Exclusive
Yes
From
Priority
2
50
1
100
2
100
The IP filter ID
The filter policy is of type template.
Template —
The filter policy is of type exclusive.
Exclusive —
The filter policy ID has not been applied.
No —
The filter policy ID is applied.
Yes —
The IP filter policy description.
Shows embedding filter index
Shows embedded filters included
Shows priority of embedded filter
Shows embedded/total number of entries from embedded filter
Status:
OK—embedding operation successful, if any entries are overwritten
this will also be indicated.
Failed—embedding failed, the reason is displayed (out of resources).
Shows embedding filter index
test
Inserted
Status
1/1
OK
1/2
OK- 1 entry overwritten
0/5
Failed – out of resources
Filter Policies
Description
Page 547
Advertisement
Table of Contents
