Table of Contents
Advertisement
Show Commands
tunnel connection-id connection-id (v3) [statistics] [detail]
Context
show>router>l2tp
Description
This command displays L2TP tunnel operational information.
Parameters
statistics — Displays L2TP tunnel statistics.
detail — Displays detailed L2TP tunnel information.
peer ip-address — Displays information for the the IP address of the peer.
state tunnel-state — Displays the operational state of the tunnel.
remote-connection-id remote-connection-id (v3) — Displays information for the specified remote
group group-name — Displays L2TP tunnel information for the specified tunnel group.
assignment-id assignment-id —
local-name host-name — Specifies a local host name used by this system.
remote-name host-name — Specifies a remote host name used by this system.
connection-id connection-id — Specifies the identification number for a Layer Two Tunneling
detail — Displays detailed L2TP session information.
session-id session-id (v2) — Displays information for the specified the L2TP session.
state session-state — Displays the operational state of the L2TP session.
peer ip-address — Displays information for the specified peer IP address.
tunnel-id tunnel-id (v2) — Displays information for the specified ID of a L2TP tunnel.
control-connection-id connection-id (v3) — Displays information for the specified ID of a L2TP
Page 282
connection ID.
Protocol connection.
Values
1 — 429496729
Values
1 — 65535
Values
closed, closed-by-peer, draining, drained, established, established-idle, idle, wait-
reply, wait-conn
Values
ipv4-address
ipv6-address
In L2TP version 2, it is the 16-bit tunnel ID.
Values
1 — 65535
tunnel. In L2TP version 3, it is the 32-bit control connection ID.
Values
1 — 429496729
a.b.c.d (host bits must be 0)
x:x:x:x:x:x:x:x[-interface]
x:x:x:x:x:x:d.d.d.d[-interface]
x: [0..FFFF]H
d: [0..255]D
interface: 32 characters maximum, mandatory for link local
addresses
7750 SR OS Router Configuration Guide
Advertisement
Table of Contents
