Table of Contents
Advertisement
Inactive
Inactive
Inactive
-------------------------------------------------------------------------------
No. of Routes: 10
===============================================================================
*A:Dut-C# show router 1 tms routes
===============================================================================
TMS Routes (IPv4)
===============================================================================
Status
-------------------------------------------------------------------------------
Active
-------------------------------------------------------------------------------
No. of Routes: 1
===============================================================================
tunnel-table
Syntax
tunnel-table [ip-address[/mask]] [protocol protocol | sdp sdp-id] [summary]
Context
show>router
Description
This command displays tunnel table information. Note that auto-bind GRE tunnels are not displayed in
show command output. GRE tunnels are not the same as SDP tunnels that use the GRE encapsulation
type. When the auto-bind command is used when configuring a VPRN service, it means the MP-BGP
NH resolution is refering to the core routing instance for IP reachability. For a VPRN service this object
specifies the lookup to be used by the routing instance if no SDP to the destination exists.
Parameters
ip-address[/mask] — Displays the specified tunnel table's destination IP address and mask.
protocol protocol — Dislays LDP protocol information.
sdp sdp-id — Displays information pertaining to the specified SDP.
summary — Displays summary tunnel table information.
Output
Tunnel Table Output — The following table describes tunnel table output fields.
Destination
Owner
Encap
Tunnel ID
Pref
Nexthop
7750 SR OS Router Configuration Guide
107.0.0.1/32
108.0.0.1/32
109.0.0.1/32
Network
100.0.0.1/32
Label
The route's destination address and mask.
Specifies the tunnel owner.
Specifies the tunnel's encapsulation type.
Specifies the tunnel (SDP) identifier.
Specifies the route preference for routes learned from the configured
peer(s).
The next hop for the route's destination.
IP Router Configuration
mda-2-1
mda-2-1
mda-2-1
Next Hop[Interface Name]
mda-2-1
Description
Page 265
Advertisement
Table of Contents
