Table of Contents
Advertisement
fp-tunnel-table
Syntax
fp-tunnel-table slot-number [ip-prefix/prefix-length]
Context
show>router
Description
This command displays the IOM/IMM label, next-hop and outgoing interface information for BGP,
LDP and RSVP tunnels used in any of the following applications:
• BGP shortcut (configure>router>bgp>igp-shortcut)
• IGP shortcut (config>router>isis[ospf]>rsvp-shortcut)
• IGP prefix resolved to an LDP LSP (config>router>ldp-shortcut)
• Static prefix shortcut
• VPRN auto-bind
• 6PE/6VPE.
Parameters
slot-number — Displays information for the specified slot.
ip-prefix[/prefix-length] — Displays routes only matching the specified ip-address and length.
icmp6
Syntax
icmp6
Context
show>router
Description
This command displays Internet Control Message Protocol Version 6 (ICMPv6) statistics. ICMP
generates error messages (for example, ICMP destination unreachable messages) to report errors during
processing and other diagnostic functions. ICMPv6 packets can be used in the neighbor discovery
protocol and path MTU discovery.
Output
icmp6 Output — The following table describes the show router icmp6 output fields:
Total
Destination
Unreachable
7750 SR OS Router Configuration Guide
Values
1 — 10
Values
ipv4-prefix:
ipv4-prefix-length:
ipv6
ipv6-prefix[/pref*:
prefix-length:
Label
The total number of all messages.
The number of message that did not reach the destination.
IP Router Configuration
a.b.c.d (host bits must be set to 0)
0 — 32
x:x:x:x:x:x:x:x (eight 16-bit pieces)
x:x:x:x:x:x:d.d.d.d
x: [0 — FFFF]H
d: [0 — 255]D
1 — 128ipv6
Description
Page 217
Advertisement
Table of Contents
