Router L2Tp Commands - Alcatel-Lucent 7750 SR-OS Configuration Manual

Router L2TP Commands

l2tp
Syntax l2tp
Context config>router
Description
This command enables the context to configure L2TP parameters. L2TP extends the PPP model by
allowing Layer 2 and PPP endpoints to reside on different devices interconnected by a packet-
switched network.
calling-number-format
Syntax calling-number-format ascii-spec
no calling-number-format
Context config>router>l2tp
Description
This command what string to put in the Calling Number AVP, for L2TP control messages related to a
session in this L2TP protocol instance.
Parameters ascii-spec — Specifies the L2TP calling number AVP.
exclude-avps
Syntax exclude-avps calling-number
no exclude-avps
Context config>router>l2tp
Description
This command configures the L2TP AVPs to exclude.
7750 SR OS Router Configuration Guide
Values ascii-spec char-specification ascii-spec
char-specification
ascii-char
char-origin
origin
ascii-char | char-origin
a printable ASCII character
%origin
S | c | r | s | l
S - system name, the value of
TIMETRA-CHASSIS-MIB::tmnxChassisName
c - Agent Circuit Id
r - Agent Remote Id
s - SAP ID, formatted as a character string
l - Logical Line ID
IP Router Configuration
Page 129