Alcatel-Lucent 7750 SR-OS Configuration Manual page 492

ACL Filter Policy Commands
The no form of the command reverts to the default.
Default
none
Parameters
entry entry-id — Specifies at what place the filter entries received from RADIUS will be inserted in
count count — Specifies the count.
sub-insert-shared-radius
Syntax sub-insert-shared-radius start-entry entry-id count count
no sub-insert-shared-radius
Context config>filter>ip-filter
config>filter>ipv6-filter
Description This command configures the insert point for shared host rules from RADIUS.
entry entry-id — Identifies a filter on this system.
count count — Specifies the count.
sub-insert-wmark
Syntax sub-insert-wmark low low-watermark high high-watermark
no sub-insert-wmark
Context config>filter>ip-filter
config>filter>ipv6-filter
Description
This command configures the low and high watermark percentage for inserted filter entry usage
reporting.
The no form of the command reverts to the default.
Default none
Parameters low low-watermark — Specifies the utilization of the filter ranges for filter entry insertion, at which a
Page 492
the filter.
Values
1 — 65535
Values
1 — 65535
Values
1 — 65535
Values 1 — 65535
table full alarm will be cleared by the agent.
Values 0 — 100
7750 SR OS Router Configuration Guide