Table of Contents
Advertisement
Parameters
filter-name — Specifies the filter name up to 64 characters in length.
group-inserted-entries
Syntax
group-inserted-entries application application location location
Context
config>filter>ip-filter
config>filter>ipv6-filter
Description
This command groups filter entries that are inserted in a filter by either RADIUS or Credit Control.
Parameters
application application — Specifies for which application the the inserted entries must be grouped.
location location — Specifies at what location the inserted entries must be grouped.
renum
Syntax
renum old-entry-id new-entry-id
Context
config>filter>ip-filter
config>filter>ipv6-filter
config>filter>mac-filter
Description
This command renumbers existing MAC or IP filter entries to properly sequence filter entries.
This may be required in some cases since the OS exits when the first match is found and executes the
actions according to the accompanying action command. This requires that entries be sequenced
correctly from most to least explicit.
Parameters
old-entry-id — Enter the entry number of an existing entry.
new-entry-id — Enter the new entry-number to be assigned to the old entry.
7750 SR OS Router Configuration Guide
Values
radius, credit-control
Values
top, bottom
Values
1 — 65535
Values
1 — 65535
Filter Policies
Page 527
Advertisement
Table of Contents
