Table of Contents
Advertisement
Router L2TP Commands
Description
This command specifies what to do in case the system receives a L2TP responsefrom another address
than the one the request was sent to.
Parameters
accept — Specifies that this system accepts any source IP address change of received L2TP control
ignore — Specifiesthat this system ignores any source IP address change of received L2TP control
reject — Specifies that this system rejects any source IP address change of received L2TP control
receive-window-size
Syntax
receive-window-size [4..1024]
no receive-window-size
Context
config>router>l2tp
Description
This command configures the L2TP receive window size.
session-limit
Syntax
session-limit session-limit
no session-limit
Context
config>router>l2tp
Description
This command configures the L2TP session limit of this router.
Parameters
session-limit — Specifies the session limit.
group
Syntax
group tunnel-group-name [create]
no group tunnel-group-name
Context
config>router>l2tp
Description
This command configures an L2TP tunnel group.
Parameters
tunnel-group-name — Specifies a name string to identify a L2TP group up to 63 characters in length.
Page 134
messages related to a locally originated tunnel in the state waitReply and rejectsany peer address
change for other tunnels; in case the new peer IPaddress is accepted, it is learned and used as
destination addressin subsequent L2TP messages.
messages, does not learn anynew peer IP address and does not change the destination address
insubsequent L2TP messages.
messages and drops those messages.
Values
1..131071
7750 SR OS Router Configuration Guide
Advertisement
Table of Contents
