Table of Contents
Advertisement
Show Commands
policy-edits
Syntax
policy-edits
Context
show>router
Description
This command displays edited policy information.
route-table
Syntax
route-table [family] [ip-prefix[/prefix-length] [longer|exact|protocol protocol-name] [all]]
[next-hop-type type][qos][alternative]
route-table [family] summary
route-table tunnel-endpoints [ip-prefix[/prefix-length]] [longer|exact] [detail]
Context
show>router
Description
This command displays the active routes in the routing table.
If no command line arguments are specified, all routes are displayed, sorted by prefix.
Parameters
family — Specify the type of routing information to be distributed by this peer group.
ip-prefix[/prefix-length] — Displays routes only matching the specified ip-address and length.
longer — Displays routes matching the ip-prefix/mask and routes with longer masks.
exact — Displays the exact route matching the ip-prefix/mask masks.
protocol protocol-name — Displays routes learned from the specified protocol.
summary — Displays a route table summary information.
tunnel-endpoints — Specifies to include tunnel endpoint information.
Page 242
Values
ipv4 — Displays only those BGP peers that have the IPv4 family enabled and not
those capable of exchanging IP-VPN routes.
ipv6 — Displays the BGP peers that are IPv6 capable.
mcast-ipv4 — Displays the BGP peers that are IPv4 multicast capable.
mcast-ipv6 — Displays multicast IPv6 route table.
Values
ipv4-prefix:
ipv4-prefix-length:
ipv6
ipv6-prefix[/pref*:
prefix-length:
Values
local, sub-mgmt, managed, static, ospf, ospf3, isis, rip, aggregate, bgp, bgp-vpn
a.b.c.d (host bits must be set to 0)
0 — 32
x:x:x:x:x:x:x:x (eight 16-bit pieces)
x:x:x:x:x:x:d.d.d.d
x: [0 — FFFF]H
d: [0 — 255]D
1 — 128ipv6
7750 SR OS Router Configuration Guide
Advertisement
Table of Contents
