Alcatel-Lucent 7750 SR-OS Configuration Manual page 592

Generic Commands
Description This command configures the size for the specified flow table. The OpenFlow switch instance must
be shutdown to modify this parameter.
The no form of this command restores the default size.
Default
no max-size
Parameters
size — Specifies the maxiumum size limit for the flow table.
no-match-action
Syntax no-match-action {drop | fall-through}
no no-match-action
Context config>open-flow>of-switch>flowtable
Description This command configures the action for the Flow Table when a packet does not match any entry for
the controller. The OpenFlow switch instance must be shutdown to modify this parameter.
The no form of this command restores the default action.
Default
no-match-action fall-through
Parameters
drop — Packets that do not match entries in the flow table as programmed by the OpenFlow switch
fall-through — Packets that do not match entries in the flow table as programmed by the OpenFlow
Page 592
Values
1—1000
will be dropped
switch will be forwarded using regular processing of the router. Note that fall-through applies if
an error occurs that prevents a flow-table from being installed in a filter policy.
7750 SR OS Router Configuration Guide