Alcatel-Lucent 7750 SR-OS Configuration Manual page 490

ACL Filter Policy Commands
Parameters filter-id — Specifies a previously defined embedded filter policy.
offset — a value from 0 to 65535, an embedded filter entry X will have an entry X + offset in the
embedding filter.
filter-name
Syntax filter-name filter-name
Context config>filter>ip-filter
config>filter>ipv6>filter
config>filter>mac-filter
Description
This command configures filter-name attribute of a given filter. filter-name, when configured, can be
used instead of filter ID to reference the given policy in the CLI.
Default no filter-name
Parameters
filter-name — A string of up to 64 characters uniquely identifying this filter policy.
scope
Syntax scope {exclusive | template | embedded}
no scope
Context config>filter>ip-filter
config>filter>ipv6-filter
config>filter>mac-filter
Description
This command configures the filter policy scope as exclusive, template, or embedded. If the scope of
the policy is template and is applied to one or more services or network interfaces, the scope cannot
be changed.
The no form of the command sets the scope of the policy to the default of template.
Default template
Parameters
exclusive — When the scope of a policy is defined as exclusive, the policy can only be applied to a
template — When the scope of a policy is defined as template, the policy can be applied to multiple
embedded — When the scope of a policy is defined as embedded, the policy cannot be applied
Page 490
single entity (SAP or network port). Attempting to assign the policy to a second entity will result
in an error message. If the policy is removed from the entity, it will become available for
assignment to another entity.
SAPs or network ports.
directly to SAP/interface. The policy defines embedded filter rules, which are embedded by
other exclusive/template filter policies. embedded scope is supported for IP and IPv6 filter
policies only.
7750 SR OS Router Configuration Guide