Enabling Cflowd - Alcatel-Lucent 7750 SR-OS Configuration Manual

Enabling Cflowd

Cflowd is disabled by default. Executing the command configure cflowd will enable cflowd, by
default cflowd is not shutdown but must be configured including at least one collector to be active.
Use the following CLI syntax to enable cflowd:
CLI Syntax: config# cflowd
The following example displays the default values when cflowd is initially enabled. No collectors
or collector options are configured.
A:ALA-1>config# info detail
...
#------------------------------------------
echo "Cflowd Configuration"
#------------------------------------------
cflowd
exit
#------------------------------------------
A:ALA-1>config#
Page 616
no shutdown
active-timeout 30
cache-size 65536
inactive-timeout 15
overflow 1
rate 1000
template-retransmit 600
no shutdown
7750 SR OS Router Configuration Guide