Table of Contents
Advertisement
Router Global Commands
Context
config>router>bfd>bfd-template
Description
This command specifies the transmit timer used for BFD packets. If the template is used for a BFD
session on an MPLS-TP LSP, then this timer is used for CC packets.
Default
no transmit-interval
Parameters
transmit-interval — Specifies the transmit interval. Note that the minimum interval that can be
receive-interval
Syntax
receive-interval receive-interval
no receive-interval
Context
config>router>bfd>bfd-template
Description
This command specifies the receive timer used for BFD packets. If the template is used for a BFD
session on an MPLS-TP LSP, then this timer is used for CC packets.
Default
no receive-interval
Parameters
receive-interval — Specifies the receive interval. Note that the minimum interval that can be
cv-tx
Syntax
cv-tx transmit-interval
no cv-tx
Context
config>router>bfd>bfd-template
Description
This command specifies the transmit interval used by BFD packets used for MPLS-TP proactive CV.
Default
no cv-tx
Parameters
transmit-interval — Specifies the transmit interval. This parameter is only used if a BFD session is
Page 120
configured is hardware dependent.
Values
10 ms — 100,000 ms in 1 ms intervals
Default
10 ms for CPM3 or higher; 1 second for other hardware
configured is hardware dependent.
Values
10 ms — 100,000 ms in 1 ms intervals
Default
10 ms for CPM3 or higher; 1 second for other hardware
enabled with CV on an MPLS-TP LSP.
Values
1 sec to 30 sec in 1 second increments
Default
1 second
7750 SR OS Router Configuration Guide
Advertisement
Table of Contents
