Alcatel-Lucent 7750 SR-OS Configuration Manual page 118

Router Global Commands
Parameters ip-prefix/mask — The IP address prefix to include in the service prefix allocation in dotted decimal
sgt-qos
Syntax sgt-qos
Context config>router
Description This command configures DSCP/Dot1p re-marking for self-generated traffic.
application
Syntax application dscp-app-name dscp {dscp-value |dscp-name}
application dot1p-app-name dot1p dot1p-priority
no application {dscp-app-name|dot1p-app-name}
Context config>router>sgt-qos
Description This command configures DSCP/Dot1p re-marking for applications.
Parameters dscp-app-name — Specifies the DSCP application name.
dscp-value — Specifies the DSCP value
dscp-name — Specifies the DSCP name.
Page 118
notation.
Values ipv4-prefix:
ipv4-prefix-length:
ipv6-prefix:
ipv6-prefix-length:
Values
exclusive
When this option is specified, the addresses configured are exclusively used for services and
cannot be assigned to network ports.
Values bgp, cflowd, dhcp, dns, ftp, icmp, igmp, igmp-reporter, l2tp, ldp, mld, msdp, ndis,
ntp, ospf, pim, ptp, radius, rip, rsvp, snmp, snmp-notification, srrp, ssh, syslog,
tacplus, telnet, tftp, traceroute, vrrp
Values
0 — 63
none, be, ef, cp1, cp2, cp3, cp4, cp5, cp6, cp7, cp9, cs1, cs2, cs3, cs4, cs5, nc1, nc2, af11, af12,
af13, af21, af22, af23, af31, af32, af33, af41, af42, af43, cp11, cp13, cp15, cp17, cp19, cp21,
cp23, cp25, cp27, cp29, cp31, cp33, cp35, cp37, cp39, cp41, cp42, cp43, cp44, cp45, cp47, cp49,
cp50, cp51, cp52, cp53, cp54, cp55, cp57, cp58, cp59, cp60, cp61, cp62, cp63
a.b.c.d (host bits must be 0)
0 — 32
x:x:x:x:x:x:x:x (eight 16-bit pieces)
x:x:x:x:x:x:d.d.d.d
x: [0 — FFFF]H
d: [0 — 255]D
0 — 128
7750 SR OS Router Configuration Guide