Alcatel-Lucent 7750 SR-OS Configuration Manual page 501

dscp
Syntax dscp dscp-name
no dscp
Context config>filter>ip-filter>entry>match
config>filter>ipv6-filter>entry>match
Description This command configures a DiffServ Code Point (DSCP) name to be used as an IP filter match
criterion.
The no form of the command removes the DSCP match criterion.
Default
no dscp
Parameters
dscp-name — Configure a dscp name that has been previously mapped to a value using the dscp-
dst-ip
Syntax dst-ip {ipv-address [/mask]} [netmask
dst-ip {ipv6-address/prefix-length | mask | ipv6-prefix-list prefix-list-name}
no dst-ip
Context config>filter>ip-filter>entry>match
config>filter>ipv6-filter>entry>match
Description
This command configures a destination IP address range to be used as an IP filter match criterion.
To match on the destination IP address, specify the address and its associated mask, 10.1.0.0/16. The
conventional notation of 10.1.0.0 255.255.0.0 may also be used.
The no form of the command removes the destination IP address match criterion.
Default none
Parameters
ip-prefix — The IP prefix for the IP match criterion in dotted decimal notation.
ipv6-address — The valid IPv6 prefix for the IP match criterion in dotted decimal notation.
ip-prefix-list — creates a list of IPv4 prefixes for match criteria in IPv4 ACL and CPM filter
ipv6-prefix-list — creates a list of IPv6 prefixes for match criteria in IPv6 ACL and CPM filter
ip-prefix-list-name — A string of up to 32 characters of printable ASCII characters. If special
7750 SR OS Router Configuration Guide
name command. The DiffServ code point may only be specified by its name.
Values
be, cp1, cp2, cp3, cp4, cp5, cp6, cp7, cs1, cp9, af11, cp11, af12, cp13, af13, cp15,
cs2, cp17, af21, cp19, af22, cp21, af23, cp23
Values
0.0.0.0 — 255.255.255.255
Values
0.0.0.0 — 255.255.255.255
policies.
policies.
characters are used, the string must be enclosed within double quotes.
ip-prefix-list prefix-list-name]
|
Filter Policies
Page 501