Configuring Ibox Communications Options - Serial - GE iBox Installation And Maintenance Manual

GE Grid Solutions

Configuring iBox Communications Options - Serial

Introduction Use the following procedure to configure iBox Communications Options if you are
operating the iBox Kit through a serial connection.
Procedure:
Step
Configuring
1
Communi-
cations
2
Options -
3
Serial
4
Next Step The next step is:
• Configuring the Application Firmware on page 96
GE Information
In the Project tab area, right-click the iBox device icon.
Click Communications group > Options command.
On the Interface tab, select Direct Serial under Connection Type and
COM1 from the Comm Port list.
Click OK to save.
Installation and Maintenance Guide
Action
994-0047-5.10-4
iBox/iBox Kit
95