GE iBox Installation And Maintenance Manual page 103

GE Grid Solutions
Configuring the iBox PPP Driver and Internet Data Links
Procedure:
Step
Configuring
1
the PPP
Driver
2
3
4
5
6
7
GE Information
Select the iBox device.
Click Communications > Options.
Result: The D2x Device Communication Options window > Interface tab
appears.
Select the PPP Connection Type.
Result: The tabs applicable to the connection type appear.
Click the Tables tab.
On the PPP main config tab, verify the following settings and modify
them if necessary:
Field
Port
Baud
Bits per char
Parity Type
Parity Mode
Stop Bits
RTS
CTS
DCD
RTS on delay
DCD on delay
RTS off delay
Max PPP receive unit
Restart timer
ACCM
CHAP
Challenge_retries
Challenge_period
Note: You should not need to change any of the above settings from
their default values. If you do, you also need to make
corresponding changes to the Digi One
equipped, or to the equipment to which the iBox Ethernet port is
connected. See "Configuring the Ethernet Module" on page 109.
Close the PPP Driver window.
Click Yes to save your changes.
Installation and Maintenance Guide
Action
Value
COM3
19.2K
8
Even
None
1
Disable
Disable
Enable
0
0
0
1500
3
Disable
Disable
2
5
®
Ethernet Module, if
994-0047-5.10-4
iBox/iBox Kit
Continued on next page
103