GE iBox Installation And Maintenance Manual page 114

iBox/iBox Kit
Installation and Maintenance Guide
Configuring the Ethernet Module
Procedure:
Step
Configuring
20
the Digi One
(continued)
21
22
23
114
, continued
Select your device.
Note: The MAC address of your Digi One IAP is located on the white
label on the bottom or back of the device.
Click Next.
Result: The Configure Network Settings page appears:
Configure the Digi One IP Settings
Select Use the following IP settings.
Enter the Digi One Ethernet IP address and subnet mask, as shown in the
above example. Enter a gateway address if one is required. Check with
your network administrator if you are not sure.
994-0047-5.10-4
GE Grid Solutions
Action
Continued on next page
GE Information