GE iBox Installation And Maintenance Manual page 121

GE Grid Solutions
Configuring the Ethernet Module
Procedure:
Step
Configuring
36
the Digi One
(continued)
37
38
GE Information
, continued
To confirm that it is correctly configured, ping the Digi One through the
DOS command line.
Under Configuration, click Security.
Result: The Security Configuration dialog appears:
Enter and confirm your new administrator password and click Apply.
Note: The next time you browse to the Digi One Web server, you will
need to enter user name root and this new password. If you forget
this password, you can reset the Digi One to its default
configuration and password (user name root, password dbps), by
following the procedure outlined in "Resetting the Digi One
Configuration" on page 153. If you reset the Digi One, you will
need to reconfigure it using the procedure outlined in this section.
Note: You will now be able to configure the Digi One through its Web
server. Refer to the Digi One User's Guide, which you can obtain
from the Digi Software & Documentation CD.
Installation and Maintenance Guide
Action
994-0047-5.10-4
iBox/iBox Kit
121