Configuring Project Properties - Serial - GE iBox Installation And Maintenance Manual

iBox/iBox Kit
Installation and Maintenance Guide

Configuring Project Properties - Serial

Introduction Use the following procedure to configure Project Properties if you are operating the
iBox Kit through a serial connection.
Procedure: Step
Configuring
1
Project
Properties -
Serial
2
92
In SGConfig, click GE > Project > Properties.
Result: The Select Project window appears:
Select your project under SGConfig Projects and click OK.
Result: The Project Properties window appears:
994-0047-5.10-4
GE Grid Solutions
Action
Continued on next page
GE Information