GE iBox Installation And Maintenance Manual page 151

GE Grid Solutions
IBOX Kit Ethernet (IBOX-LAN)
iBox DNP 3.0 Master Address: 10
iBox DNP 3.0 Slave Address: 1
DNP DPA Communication Port: COM1
Baud Rate: 9600
Communication Type: RS-232
iBox DNP 3.0 Master Address: 10
iBox DNP 3.0 Slave Address: 1
Communication Port: Ethernet
DNP DPA
Master IP Address: 192.168.1.200
Slave IP Address: 192.168.1.20
Subnet Mask: 255.255.255.0
iBox DNP 3.0 Master Address: 10
iBox DNP 3.0 Slave Address: 1
DNP DCA
Communication Port: COM3
Baud Rate: 9600
Communication Type: RS-232
User Name: westronic
WESMAINT Password: rd
Control Password: control
IBOX Kit with AC Analogs and Ethernet (IBOX-ACL)
iBox DNP 3.0 Master Address: 10
iBox DNP 3.0 Slave Address: 1
DNP DPA Communication Port: COM1
Baud Rate: 9600
Communication Type: RS-232
iBox DNP 3.0 Master Address: 10
iBox DNP 3.0 Slave Address: 1
Communication Port: Ethernet
DNP DPA
Master IP Address: 192.168.1.200
Slave IP Address: 192.168.1.20
Subnet Mask: 255.255.255.0
User Name: westronic
WESMAINT Password: rd
Control Password: control
GE Information
Configuration Details
Note: COM2 is used to connect to the Ethernet Module via PPP/TCP/IP.
Configuration Details
Note: COM2 is used to connect to the Ethernet Module via PPP/TCP/IP.
Note: COM3 is used to connect the AC Module to the iBox.
Installation and Maintenance Guide
Comments
Refer to point map tables for more detail.
Refer to point map tables for more detail.
The DNP DCA is configured to poll an iBox. If
you connect COM3 to COM1, you can see
the DNP DCA polling the DNP DPA.
Comments
Refer to point map tables for more detail.
Refer to point map tables for more detail.
994-0047-5.10-4
iBox/iBox Kit
151