GE iBox Installation And Maintenance Manual page 72

iBox/iBox Kit
Installation and Maintenance Guide
Runtime and Startup Errors,
NVRAM Check Failure
Application Checksum
Failure
BootROM Checksum
Failure
Start-Up Failure
System Shut Down
Only the System
Monitor is Running
Code Download
Failure
Cannot Download
Code
72
Continued
Symptom Possible Causes
System start-up fails
System start-up fails
System start-up fails
RAM check, NVRAM check,
Application checksum, or
BootROM checksum failed
during system start-up.
RAM, NVRAM, FLASH, or
BootROM internal system
diagnostics failed.
No valid application code
is detected.
Download interrupted or
data error encountered in
downloaded file.
Logged into the
Application Monitor.
994-0047-5.10-4
GE Grid Solutions
Suggestions
Use WESMAINT to view the error
message, and refer to related
configuration guide for
suggestions.
Use WESMAINT to view the error
message, and refer to related
configuration guide for
suggestions.
Use WESMAINT to view the error
message, and refer to related
configuration guide for
suggestions.
Use WESMAINT to view the error
message, and refer to related
configuration guide for
suggestions.
Use WESMAINT to view the error
message, and refer to related
configuration guide for
suggestions
Load application code
Clear Flash EPROM memory.
Restart download procedure.
Exit Application Monitor, and
launch System Monitor.
GE Information