GE iBox Installation And Maintenance Manual page 169

GE Grid Solutions
Appendix G: Error Messages
When processing an output request, the Plant I/O Subsystem (P097) DCA may not be able to execute the
request. If this occurs, the Plant I/O Subsystem DCA will set the status code returned with the request to
the appropriate error code, and negatively acknowledge (NACK) the control request. This section
describes the possible status codes returned.
Control Requests Error Codes
Error Message
Unsupported Point (0x0010)
Unsupported Operation (0x0011)
Output Not Available (0x0012)
Queue Not Available (0x0013)
Invalid Request Parameters
(0x0014)
Too Much Lead Time (0x0015)
Not Enough Lag Time (0x0016)
Window Too Small (0x0017)
No Room on Queue (0x0018)
Not Armed (0x0019)
Analog Requests Error Codes
Error Message
Analog Output Unsupported Point (0x0010)
Analog Output Not Available (0x0011)
Online Configuration in Progress (0x0012)
Online Configuration Invalid Type (0x0013)
Online Configuration Invalid Settings (0x0014)
Online Configuration Alarm Not Available (0x0015)
Online Configuration Invalid Alarm Number
(0x0016)
Online Configuration No Alarm Number (0x0017)
Online Configuration Cancelled (0x0018)
Online Configuration Time Out (0x0019)
Online Configuration Disabled (0x001A)
Online Configuration Change Disabled (0x001B)
Online Configuration Out of Events (0x001C)
GE Information
Description
Requested control point is not supported.
Requested control operation is not supported for this point.
The control output is not available for this point.
The control output queue is not available.
The control output request parameters are not valid for this control
point.
The control output request lead time is too much.
The control output request lag time is not enough.
Control output request time window is too small.
The control output request queue is full.
The control request point is not armed.
Description
The analog output point is not supported.
The analog output is not available.
Another online configuration change is in progress.
Configured alarm settings do not match the alarm
type.
Configured alarm settings are out of range.
Specified alarm number is unavailable.
Specified alarm number is out of range.
No alarm number has been submitted.
Configuration change is cancelled.
Configuration change cancelled due to timeout.
Online configuration services are disabled.
Online configuration change service is disabled
Request rejected. Lacked WIN event buffers.
994-0047-5.10-4
iBox/iBox Kit
Installation and Maintenance Guide
169