GE iBox Installation And Maintenance Manual page 42

iBox/iBox Kit
Installation and Maintenance Guide
Downloading your iBox Configuration
Procedure:
Step
Downloading
10
your iBox
Configuration
(continued)
11
12
13
14
15
42
On the SGConfig click Terminal Emulator Connectivity group, click
Connect.
Result: SGConfig connects to the iBox and the 68K Monitor command
line appears.
On the SGConfig click Terminal Emulator Actions menu, click Sync To
Device.
Result: The configuration download starts.
A confirmation window appears when the download is
complete.
Click Reboot.
Result: The iBox reboots.
Note: If you changed the baud rate to 38400, the WESMAINT
communications rate automatically restores to 9600 baud after the
iBox reboots. You need to manually restore the SGConfig
terminal emulator communications rate to 9600.
From SGConfig, click the Connectivity group > Disconnect command.
Note: If you changed the baud rate to 38400, the WESMAINT
communications rate automatically restores to 9600 baud after the
iBox reboots. You need to manually restore the SGConfig
terminal emulator communications rate to 9600.
On the File menu, click Exit.
Physically disconnect your PC from the iBox.
994-0047-5.10-4
, continued
Action
GE Grid Solutions
GE Information