GE iBox Installation And Maintenance Manual page 131

GE Grid Solutions
Testing the iBox Kit
Overview You can verify the iBox Kit is operating properly by:
• Inspecting the LEDs on each of the iBox Kit components, and
• Pinging the Ethernet Module and the iBox from your PC
Digi One IAP When operating normally, the Digi One LEDs appear as follows:
LEDs
ADAM-4017+ The ADAM-4017+ has a single GREEN LED, which operates as follows:
LEDs
LED Operation
OFF
GREEN Solid
GREEN Flashing
DMMS LEDs Refer to the manufacturer's manual.
iBox LEDs For information on iBox LED operation, refer to:
• "LEDs" on page 32 (for LED operation during self diagnostics)
• "LED Descriptions" on page 46 (for normal LED operation)
"Errors Indicated by LEDs" on page 74 (for information on using LED
•
indications to troubleshoot iBox problems)
Pinging the If the iBox Kit modules are operating correctly, and it is configured for LAN
Ethernet and connection, you will be able to ping the Ethernet Module and iBox IP addresses from
iBox your PC.
GE Information
LED Normal Operation
POWER Solid GREEN
LINK Solid GREEN
DCD Solid GREEN
DSR Solid GREEN
DTR Solid GREEN
RTS Solid GREEN
TX Flashing GREEN
RX Flashing GREEN
Power OFF
Power ON, unit is not being polled over the
Modbus interface.
Power ON, unit is being polled over the Modbus
interface at the same rate as the LED is flashing.
Installation and Maintenance Guide
Description
994-0047-5.10-4
iBox/iBox Kit
131