GE iBox Installation And Maintenance Manual page 100

iBox/iBox Kit
Installation and Maintenance Guide
Configuring Project Properties - LAN
Procedure:
Step
Configuring
3
Project
Properties -
4
LAN
5
[continued]
6
Next Step The next step is:
• Configuring iBox Device Properties - LAN on page 101
100
Click the D2x > General tab.
On the General tab, select LAN Based Project.
Click the Segments tab.
On the LAN A tab, select LAN A Enabled, and enter the IP Address and
Subnet Mask.
Note: Even if your LAN has a default gateway, you do not need to enter
it here.
Click OK to save.
994-0047-5.10-4
, continued
Action
GE Grid Solutions
GE Information