GE iBox Installation And Maintenance Manual page 111

GE Grid Solutions
Configuring the Ethernet Module
Procedure:
Step
Configuring
8
the Digi One
(continued)
9
10
11
GE Information
, continued
In Exceptions, add the default Digi One Ethernet IP address,
192.168.1.100.
Note: You can use the wildcard character (*) to specify a range of IP
addresses; for example, if you enter 192.168.*, all messages sent
to IP addresses starting with 192.168 will be sent directly, not
through the proxy server.
Note: Once you change the Digi One Ethernet IP address, you will have
to modify Proxy Settings accordingly.
Click OK and close all windows.
Changing Pass Through Switch Settings
Locate the pass-through switch on the bottom of the Digi One IAP
Change the switch setting from the default state OFF to ON
Reboot the Digi One IAP. Refer to steps 1 to 4 in Appendix C: Resetting
the Digi One Configuration.
Installation and Maintenance Guide
Action
994-0047-5.10-4
iBox/iBox Kit
Continued on next page
111