Password Authentication Enabled Stelnet Client Configuration Example - HP 6600 Security Configuration Manual

Figure 114 Specifying the private key file
e. Click Open to connect to the server.
If the connection is successfully established, the system asks you to enter the username. After
entering the username (client002), you can enter the command-line interface of the server.
Password authentication enabled Stelnet client configuration
example
Network requirements
As shown in
B acts as the Stelnet server and uses password authentication. The username and password of the client
are saved on Router B.
Figure 115 Network diagram
Configuration procedure
1. Configure the Stelnet server:
# Generate the RSA key pairs.
<RouterB> system-view
Figure 1 15, you can log in to Router B through the Stelnet client running on Router A. Router
336