HP 6600 Security Configuration Manual page 436

a. Select Authentication > Certificate Management > Certificate from the navigation tree.
b. Click Create Key to enter the key generation page, as shown in
c. Set the key length to 1024.
d. Click Apply.
Figure 200 Generating an RSA key pair
Retrieve the CA certificate:
4.
a. After the key pair is generated, click the Retrieve Cert button on the certificate management
page.
The Retrieve Certificate page appears, as shown in
b. Select sslvpn as the PKI domain.
c. Select CA as the certificate type.
d. Click Apply.
Figure 201 Retrieving the CA certificate to the local device
5. Request a local certificate:
a. After the CA certificate retrieval operation is complete, click Request Cert on the certificate
management page.
b. Select sslvpn as the PKI domain.
c. Click Apply.
The system displays "Certificate request has been submitted."
d. Click OK to confirm the operation.
Figure
422
Figure 200.
201.