HP 6600 Security Configuration Manual page 187

Figure 74 Adding a port group
5. Select User Access Manager > Service Parameters > Validate from the navigation tree to validate
the configurations.
Configuring the router
1. Configure a RADIUS scheme:
# Create RADIUS scheme rs1 and enter its view.
<Router> system-view
[Router] radius scheme rs1
# Configure the server type for the RADIUS scheme. When using the IMC server, configure the
RADIUS server type as extended.
[Router-radius-rs1] server-type extended
# Specify the primary authentication/authorization server, and configure the keys for
communication with the servers.
[Router-radius-rs1] primary authentication 192.168.0.112
[Router-radius-rs1] key authentication simple radius
# Configure the access device to not carry the ISP domain name in the username sent to the
RADIUS server.
[Router-radius-rs1] user-name-format without-domain
[Router-radius-rs1] quit
2. Configure an authentication domain:
# Create ISP domain dm1 and enter its view.
[Router] domain dm1
# Configure AAA methods for the ISP domain.
[Router-isp-dm1] authentication portal radius-scheme rs1
[Router-isp-dm1] authorization portal radius-scheme rs1
[Router-isp-dm1] quit
# Configure domain dm1 as the default ISP domain for all users. Then, if a user enters a username
without any ISP domain at logon, the authentication/authorization methods of the default domain
are used for the user.
[Router] domain default enable dm1
3. Configure portal authentication:
# Configure a portal server on the router, specifying the portal server name as newpt, IP address
as 192.168.0.111, key as plaintext string portal, port number as 50100, and URL as
http://192.168.0.111:8080/portal.
173