HP 6600 Security Configuration Manual page 358

The range of public key size is (512 ~ 2048).
NOTES: If the key modulus is greater than 512,
It will take a few minutes.
Press CTRL+C to abort.
Input the bits of the modulus[default = 1024]:
Generating Keys...
++++++++++++++++++++++++
+++++++++++++++++++++++
+++++
+++++
# Export the host public key to file pubkey.
[RouterA] public-key local export rsa ssh2 pubkey
[RouterA] quit
Then, you transmit the public key file to the server through FTP or TFTP. (Details not shown.)
2. Configure the SFTP server:
# Generate the RSA key pairs.
<RouterB> system-view
[RouterB] public-key local create rsa
The range of public key size is (512 ~ 2048).
NOTES: If the key modulus is greater than 512,
It will take a few minutes.
Press CTRL+C to abort.
Input the bits of the modulus[default = 1024]:
Generating Keys...
++++++++++++++++++++++++
+++++++++++++++++++++++
+++++
+++++
# Generate a DSA key pair.
[RouterB] public-key local create dsa
The range of public key size is (512 ~ 2048).
NOTES: If the key modulus is greater than 512,
It will take a few minutes.
Press CTRL+C to abort.
Input the bits of the modulus[default = 1024]:
Generating Keys...
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+++++++++++++++++++++++++++++++++++
# Enable the SSH server function.
[RouterB] ssh server enable
# Enable the SFTP server function.
[RouterB] sftp server enable
# Configure an IP address for interface GigabitEthernet 3/0/1, which the client will use as the
destination address of the SSH connection.
[RouterB] interface gigabitethernet 3/0/1
[RouterB-GigabitEthernet3/0/1] ip address 192.168.0.1 255.255.255.0
[RouterB-GigabitEthernet3/0/1] quit
344