HP 6600 Security Configuration Manual page 32

No. Attribute
40 Acct-Status-Type
45 Acct-Authentic
60 CHAP-Challenge
61 NAS-Port-Type
79 EAP-Message
80 Message-Authenticator
87 NAS-Port-Id
HP proprietary RADIUS sub-attributes
No. Sub-attribute
1 Input-Peak-Rate
2 Input-Average-Rate
3 Input-Basic-Rate
4 Output-Peak-Rate
5 Output-Average-Rate
6 Output-Basic-Rate
Description
Type of the Accounting-Request packet. Possible values include:
•
1—Start.
•
2—Stop.
•
3—Interim-Update.
•
4—Reset-Charge.
•
7—Accounting-On. (Defined in the 3rd Generation Partnership Project.)
•
8—Accounting-Off. (Defined in the 3rd Generation Partnership Project.)
•
9 to 14—Reserved for tunnel accounting.
•
15—Reserved for failed.
Authentication method used by the user. Possible values include:
•
1—RADIUS.
•
2—Local.
•
3—Remote.
CHAP challenge generated by the NAS for MD5 calculation during CHAP
authentication.
Type of the physical port of the NAS that is authenticating the user. Possible
values include:
•
15—Ethernet.
•
16—Any type of ADSL.
•
17—Cable (with cable for cable TV).
•
19—WLAN-IEEE 802.1 1.
•
201—VLAN.
•
202—ATM.
If the port is an ATM or Ethernet one and VLANs are implemented on it, the
value of this attribute is 201.
Used to encapsulate EAP packets to allow RADIUS to support EAP
authentication.
Used for authentication and verification of authentication packets to prevent
spoofing Access-Requests. This attribute is present when EAP authentication is
used.
String for describing the port of the NAS that is authenticating the user.
Description
Peak rate in the direction from the user to the NAS, in bps.
Average rate in the direction from the user to the NAS, in bps.
Basic rate in the direction from the user to the NAS, in bps.
Peak rate in the direction from the NAS to the user, in bps.
Average rate in the direction from the NAS to the user, in bps.
Basic rate in the direction from the NAS to the user, in bps.
18