HP 6600 Security Configuration Manual page 446

Figure 216 Configuring the domain policy
2. Configure a RADIUS scheme named system:
a. Select Authentication > RADIUS from the navigation tree.
b. Click Add to enter the RADIUS scheme configuration page.
c. Enter the scheme name system.
d. In the Common Configuration area, select Extended as the supported RADIUS server type, and
select Without domain name as the username format.
e. Click the Add button in the RADIUS Server Configuration area.
On the page that appears, as shown in
the server type, select IPv4 and enter IP address 10.153.10.131, enter port number 1812,
enter the key expert, enter expert again to confirm the key, and click Apply.
The RADIUS server is then added to the RADIUS server list of the RADIUS scheme. Now, the
RADIUS scheme configuration page is shown as
f. Click Apply.
Figure 217 Adding a RADIUS server for the RADIUS scheme
Figure 217, select Primary Authentication Server as
Figure 218.
432