HP 6600 Security Configuration Manual page 400

Figure 158 Adding a user-IP binding
4. Configure the user-IP binding as described in
5. Click Apply.
Table 26 Configuration items
Item
Username
IP Address
Configuring a predefined domain name
1. Select VPN > SSL VPN > Resource Management > IP Network from the navigation tree.
2. Click the Predefined Domain Name tab to view existing predefined domain names.
Figure 159 Predefined domain names
3. Click Add to enter the page for adding a predefined domain name
Figure 160 Adding a predefined domain name
4. Configure the predefined domain name as described in
Description
Specify the username to be bound with an IP address. The username must contain the
domain name. For example, aaa@local.
Specify the IP address to be bound with the username.
The specified IP address must be in the same network segment as the global IP address
pool and must not be the gateway address or any address in the global IP pool.
386
Table 26.
Table 27.