HP 6600 Security Configuration Manual page 185

Figure 70 Portal server configuration
2. Configure the IP address group:
a. Select User Access Manager > Portal Service > IP Group from the navigation tree to enter the
portal IP address group configuration page.
b. Click Add to enter the page shown in
c. Enter the IP group name.
d. Enter the start IP address and end IP address of the IP group.
Make sure that the host IP address is in the IP group.
e. Select a service group.
By default, the group Ungrouped is used.
f. Select the IP group type Normal.
g. Click OK.
Figure 71 Adding an IP address group
3. Add a portal device:
a. Select User Access Manager > Portal Service > Device from the navigation tree to enter the
portal device configuration page.
b. Click Add to enter the page shown in
Figure 71.
Figure 72.
171