HP 6600 Security Configuration Manual page 392

Figure 146 Email services
3. Click Add to enter the page for adding an email service.
Figure 147 Adding an email service resource
4. Configure the email service resource as described in
5. Click Apply.
Table 21 Configuration items
Item
Resource Name
Service Type
Remote Host
Remote Port
Local Address
Local Port
Description
Enter a name for the email service resource.
The resource name must be unique in the SSL VPN system. Resources are uniquely
identified by their names.
IMPORTANT:
If you do not configure the command for Command, HP recommends including the
resource type, local address, and local port in the resource name so that users can view
the desired information after they log in to the SSL VPN system.
Select an email service type, which can be POP3, IMAP, or SMTP.
Enter the host name or IP address of the email server.
Enter the service port number of the email server.
Enter a loopback address or a character string that represents a loopback address.
Enter the local port number. It must be the default port number for the email service of
the specified type.
378
Table 21.