HP 6600 Security Configuration Manual page 388

After you enable single login and configure single login parameters, when a user accesses the
resource through the SSL VPN service interface, the user is redirected to the specified website if the
user's username and password for accessing the website are the same as those for logging in to
the SSL VPN service interface.
5. Click Apply.
Figure 141 Configuring single login
Table 18 Configuration items
Item
Use IP network
Login Request Path
Username Parameter
Name
Password Parameter Name
Other parameters
Another way to configure the single login function is as follows:
6. Click the icon of a resource on the Web proxy server resource list, as shown in
7. Enter a username and a password (the password must be different from the username) on the
popup page, and click Apply.
The login page for the website in the resource pops up.
8. Enter the username and password again and log in.
Description
Select this box to allow IP access to the resource.
If you select this item, you must configure an IP network resource for a website
and associate the IP network resource with the relevant users. When such a user
accesses the website from the SSL VPN Web interface, the system logs the user in
automatically to the website through the IP network resource.
If you do not select this item, users access the resource through the Web proxy
server.
•
When you select the IP network mode, this item specifies the path that the
system submits during single login. If you leave this field blank, the system uses
the address that is specified in the Website Address field.
•
When the IP network mode is not selected, this item specifies the relative path
of the Web proxy website. If you leave this field blank, the SSL VPN system
uses the default page specified in the Default Page field.
Specify the username parameter name that the system submits during automatic
login.
Specify the password parameter name that the system submits during automatic
login.
Specify the other parameters for the system to submit during automatic login.
To add a parameter other than the username and password, click Add, enter the
parameter name and parameter value on the popup page and click Apply.
374
Figure 139.