Pki Configuration Examples; Certificate Request From An Rsa Keon Ca Server - HP 6600 Security Configuration Manual

Task
Display information about one or
all certificate attribute-based
access control policies.

PKI configuration examples

The SCEP add-on is required when you use the Windows Server as the CA. In this case, when you
configure the PKI domain, you must use the certificate request from ra command to specify that the entity
requests a certificate from an RA.
The SCEP add-on is not required when RSA Keon is used. In this case, when configuring a PKI domain,
you need to use the certificate request from ca command to specify that the entity requests a certificate
from a CA.

Certificate request from an RSA Keon CA server

Network requirements
The device submits a local certificate request to the CA server. The device acquires the CRLs for certificate
verification.
Figure 87 Network diagram
Configuring the CA server
1. Create a CA server named myca:
In this example, you need to configure these basic attributes on the CA server at first:
Nickname—Name of the trusted CA.
Subject DN—DN information of the CA, including the Common Name (CN), Organization Unit
(OU), Organization (O), and Country (C).
The other attributes might be left using the default values.
2. Configure extended attributes:
After configuring the basic attributes, you need to perform configuration on the jurisdiction
configuration page of the CA server. This includes selecting the proper extension profiles,
enabling the SCEP autovetting function, and adding the IP address list for SCEP autovetting.
3. Configure the CRL distribution behavior:
After completing the configuration, you need to perform CRL related configurations. In this
example, select the local CRL distribution mode of HTTP and set the HTTP URL to
http://4.4.4.133:447/myca.crl.
Command
display pki certificate
access-control-policy { policy-name
| all } [ | { begin | exclude |
include } regular-expression ]
237
Remarks
Available in any view.