Password Authentication Enabled Stelnet Client Configuration Example - HP MSR2000 Configuration Manual

e. Select Connection > SSH > Auth from the navigation tree.
The window shown in
f. Click Browse... to bring up the file selection window, navigate to the private key file
(private.ppk in this example), and click OK.
Figure 62 Specifying the private key file
g. Click Open to connect to the server.
If the connection is successfully established, the system asks you to enter the username. After
entering the username (client002), you can enter the CLI of the server.
Password authentication enabled Stelnet client configuration
example
Network requirements
As shown in
assigned the user role network-admin for configuration management. Router B acts as the Stelnet server
and uses password authentication. The username and password of the client are saved on Router B.
Figure 63 Network diagram
Figure 62
Figure 63, you can log in to Router B through the Stelnet client that runs on Router A and are
appears.
233