Setting The Maximum Number Of Ipv4 Source Guard Entries; Displaying And Maintaining Ip Source Guard - HP 6600 Security Configuration Manual

Step
3. Configure a static IPv4 source
guard entry on the port.

Setting the maximum number of IPv4 source guard entries

The maximum number of IPv4 source guard entries is used to limit the total number of static and dynamic
IPv4 source guard entries on a port. When the number of IPv4 binding entries on a port reaches the
maximum, the port does not allowed new IPv4 binding entries any more.
If the maximum number of IPv4 binding entries to be configured is smaller than the number of existing
IPv4 binding entries on the port, the maximum number can be configured successfully and the existing
entries will not be affected. New IPv4 binding entries, however, cannot be added more unless the
number of IPv4 binding entries on the port drops below the configured maximum.
To configure the maximum number of IPv4 binding entries allowed on a port:
Step
1. Enter system view.
2. Enter interface view.
3. Configure the maximum
number of IPv4 binding
entries allowed on the port.

Displaying and maintaining IP source guard

For IPv4 source guard:
Task
Display static IPv4 source guard
entries.
Display IPv4 source guard entries.
Command
ip source binding { ip-address
ip-address | ip-address ip-address
mac-address mac-address |
mac-address mac-address } [ vlan
vlan-id ]
Command
system-view
interface interface-type
interface-number
ip verify source max-entries
number
Command
display ip source binding static [ interface
interface-type interface-number |
ip-address ip-address | mac-address
mac-address ] [ slot slot-number ] [ | { begin
| exclude | include } regular-expression ]
display ip source binding [ interface
interface-type interface-number |
ip-address ip-address | mac-address
mac-address ] [ slot slot-number ] [ | { begin
| exclude | include } regular-expression ]
502
Remarks
By default, no static IPv4 binding
entry is configured on a port.
A static source guard entry can be
configured on only Layer 2
Ethernet ports.
Remarks
N/A
N/A
Optional.
Remarks
Available in any view.
Available in any view.