HP 6600 Security Configuration Manual page 439

Figure 206 Configuring a desktop sharing service resource
3. Configure global parameters for IP network resources:
a. Select VPN > SSL VPN > Resource Management > IP Network from the navigation tree.
The Global Configuration tab appears, as shown in
b. Enter the start IP address 192.168.0.1.
c. Enter the end IP address 192.168.0.100.
d. Enter the subnet mask 24.
e. Enter the gateway IP address 192.168.0.101.
f. Click Apply.
Figure 207 Configuring global parameters for IP network resources
4. Configure a host resource named sec_srv for hosts in subnet 10.153.2.0/24 in IP network mode:
a. Select VPN > SSL VPN > Resource Management > IP Network from the navigation tree.
b. Click the Host Configuration tab.
c. Click Add to enter the host resource configuration page.
d. Enter the resource name sec_srv.
e. Click the Add button under the Network Services list.
f. On the page that appears, as shown in
10.153.2.0, enter the subnet mask 24, select IP as the protocol type, specify the description
information as 10.153.2.0/24, and click Apply.
Figure
Figure 208, enter the destination IP address
425
207.