Displaying Public Keys - HP 6600 Security Configuration Manual

Method
Manually configure
the public key—input
or copy the key data
To import the host public key from a public key file to the local device:
Step
1. Enter system view.
2. Import the host public key from the public key file.
To manually configure the peer public key on the local device:
Step
1. Enter system view.
2. Specify a name for the public
key and enter public key view.
3. Enter public key code view.
4. Configure the peer public key.
5. Return to public key view.
6. Return to system view.

Displaying public keys

Task
Display the local public keys
Display the specified or all peer
public keys on the local device.
Prerequisites
•
Display and record the public key of the
intended asymmetric key pair.
•
If the peer device is an HP device, use the
display public-key local public
command to view and record its public
key. A public key displayed by other
methods for the HP device may not be in
a correct format.
Command
system-view
public-key peer keyname
public-key-code begin
Type or copy the key
public-key-code end
peer-public-key end
Command
display public-key local { dsa | rsa } public
[ | { begin | exclude | include }
regular-expression ]
display public-key peer [ brief | name
publickey-name ] [ | { begin | exclude |
include } regular-expression ]
220
Remarks
•
The recorded public key must be in
the correct format, or the manual
configuration of a
format-incompliant public key will
fail.
•
Always use the first method if you
are not sure about the format of the
recorded public key.
Command
system-view
public-key peer keyname import sshkey filename
Remarks
N/A
N/A
N/A
Spaces and carriage
returns are allowed
between characters.
When you exit public key
code view, the system
automatically saves the
public key.
N/A
Remarks
Available in any view.
Available in any view.