Configuring Radius Schemes - HP 6600 Security Configuration Manual

Table of Contents

Advertisement

Step
17.
Set the guest attribute for the
user group.
Displaying and maintaining local users and local user groups
Task
Display local user
information.
Display the user group
configuration.

Configuring RADIUS schemes

A RADIUS scheme specifies the RADIUS servers that the device can cooperate with and defines a set of
parameters that the device uses to exchange information with the RADIUS servers. There might be
authentication/authorization servers and accounting servers, or primary servers and secondary servers.
The parameters include the IP addresses of the servers, the shared keys, and the RADIUS server type.
RADIUS scheme configuration task list
Task
Creating a RADIUS scheme
Specifying the RADIUS authentication/authorization servers
Specifying the RADIUS accounting servers and the relevant parameters
Specifying the shared keys for secure RADIUS communication
Specifying a VPN for the RADIUS scheme
Setting the username format and traffic statistics units
Setting the supported RADIUS server type
Setting the maximum number of RADIUS request transmission attempts
Setting the status of RADIUS servers
Specifying the source IP address for outgoing RADIUS packets
Specifying a backup source IP address for outgoing RADIUS packets
Setting RADIUS timers
Configuring RADIUS accounting-on
Command
group-attribute allow-guest
Command
display local-user [ idle-cut { disable | enable } |
service-type { dvpn | ftp | lan-access | portal | ppp | ssh |
telnet | terminal } | state { active | block } | user-name
user-name | vlan vlan-id ] [ slot slot-number ] [ | { begin |
exclude | include } regular-expression ]
display user-group [ group-name ] [ | { begin | exclude |
include } regular-expression ]
26
Remarks
Optional.
By default, the guest attribute is not
set for a user group, and guest
users created by a guest manager
through the Web interface cannot
join the group.
Remarks
Available in any
view.
The ftp and telnet
keywords are not
supported in FIPS
mode.
Available in any
view.
Remarks
Required.
Required.
Optional.
Optional.
Optional.
Optional.
Optional.
Optional.
Optional.
Optional.
Optional.
Optional.
Optional.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hsr6600

Table of Contents