# Configure domain dm1 as the default ISP domain for all users. Then, if a user enters a username
without any ISP domain at logon, the authentication/authorization methods of the default domain
are used for the user.
[RouterA] domain default enable dm1
3.
Configure portal authentication:
# Configure the portal server as follows:
Name: newpt
IP address: 192.168.0.1 1 1
VPN: vpn3
Key: portal, in plain text
Port number: 50100
URL: http://192.168.0.1 1 1:8080/portal
[RouterA] portal server newpt ip 192.168.0.111 vpn-instance vpn3 key simple portal
port 50100 url http://192.168.0.111:8080/portal
# Enable Layer 3 portal authentication on the interface connecting the user side.
[RouterA] interface gigabitethernet 3/0/1
[RouterA–GigabitEthernet3/0/1] portal server newpt method layer3
[RouterA–GigabitEthernet3/0/1] quit
Verifying the configuration
Execute the display portal server command to check whether the portal configuration has taken effect.
After Host passes portal authentication, perform the display portal user command to view information
about online portal users on Router A.
[RouterA] display portal user all
Index:2
State:ONLINE
SubState:NONE
ACL:NONE
Work-mode:stand-alone
VPN instance:vpn1
MAC
----------------------------------------------------------------------------
000d-88f7-c268
Total 1 user(s) matched, 1 listed.
Troubleshooting portal
Inconsistent keys on the access device and the portal server
Symptom
When a user is forced to access the portal server, the portal server displays a blank webpage , rather
than the portal authentication page or an error message.
IP
Vlan
3.3.0.1
0
Interface
GigabitEthernet3/0/1
176