Verifying The Configuration - HP 6600 Security Configuration Manual

# Reboot the device.
<Sysname> reboot

Verifying the configuration

After the device reboots, enter the username (test) and password (AAbbcc1234%). The system prompts
that your first login is successful, and asks you to enter a new password. Enter a new password which has
at least four characters different than the previous one and confirm the password. Then, the system
displays the <Sysname> prompt.
User interface con0 is available.
Please press ENTER.
Login authentication
Username:test
Password:
Info: First logged in. For security reasons you will need to change your password.
Please enter your new password.
Password:**********
Confirm :**********
Updating user(s) information, please wait...........
<Sysname>
# Display the current FIPS mode. You can see that the FIPS mode is enabled.
<Sysname> display fips status
FIPS mode is enabled
538