Verifying The Configuration - HP 6600 Security Configuration Manual

Figure 218 Configuring RADIUS scheme named system
Enable RADIUS authentication for the SSL VPN domain:
3.
a. Select VPN > SSL VPN > Domain Management > Authentication Policy from the navigation
tree.
b. Click the RADIUS Authentication tab.
c. Select the box before Enable RADIUS authentication.
d. Click Apply.
Figure 219 Enable RADIUS authentication

Verifying the configuration

Launch a browser on a host, and enter https://10.1.1.1/svpn/ in the address bar to enter the SSL VPN
login page, as shown in
method and a verification code is needed for login.
Figure 220. You can see that RADIUS authentication is the default authentication
433