Specifying Nas-Port-Type For An Interface; Specifying The Nas-Port-Id For An Interface - HP 6600 Security Configuration Manual

Step
2. Specify the NAS ID value
carried in a RADIUS request.

Specifying NAS-Port-Type for an interface

NAS-Port-Type is a standard RADIUS attribute for indicating a user access port type. With this attribute
specified on an interface, when a portal user logs on from the interface, the device uses the specified
NAS-Port-Type value as that in the RADIUS request to be sent to the RADIUS server. If NAS-Port-Type is not
specified, the device uses the access port type obtained.
If there are multiple network devices between the Broadband Access Server (the portal authentication
access device) and a portal client, the BAS may not be able to obtain a user's correct access port
information.
To specify the NAS-Port-Type value for an interface:
Step
1. Enter system view.
2. Enter interface view.
3. Specify the NAS-Port-Type
value for the interface.

Specifying the NAS-Port-ID for an interface

If the device uses a RADIUS server for authentication, authorization, and accounting of portal users,
when a portal user logs on from an interface, the device sends a RADIUS request that carries the
NAS-Port-ID attribute to the RADIUS server. The portal server configuration determines the usage of the
NAS-Port-ID attribute.
To specify the NAS-Port-ID value carried in a RADIUS request sent from an interface:
Step
1. Enter system view.
2. Enter interface view.
Command
•
In system view:
portal nas-id nas-identifier
•
In interface view:
a. interface interface-type
interface-number
b. portal nas-id
nas-identifier.
Command
system-view
interface interface-type
interface-number
portal nas-port-type { ethernet |
wireless }
Command
system-view
interface interface-type
interface-number
138
Remarks
By default, the device name
configured by the sysname
command is used as the NAS ID.
For information about the sysname
command, see Fundamentals
Command Reference.
Remarks
N/A
N/A
Not configured by default.
Remarks
N/A
N/A