Task...
Display the help information of
FTP-related commands supported
by the remote FTP server.
Enable information display in a
detailed manner.
Enable FTP related debugging
when the device acts as the FTP
client.
Terminating an FTP connection
After an FTP client device establishes connection with the FTP server, use any of the following commands
to terminate the FTP connection. For more information about establishing an FTP connection, see
"Establishing an FTP
Task...
Terminate the connection to the
FTP server without exiting FTP
client view.
Terminate the connection to the
FTP server without exiting FTP
client view.
Terminate the connection to the
FTP server and return to user view.
Terminate the connection to the
FTP server and return to user view.
FTP client configuration example
Network requirements
As shown in
•
the master is 1 and that of the member switch is 2.
The IRF fabric serves as an FTP client, and the PC serves as an FTP server. The IRF fabric and the PC
•
can reach each other.
The PC keeps the updated system software image file of the IRF fabric. Use FTP to upgrade the IRF
•
fabric and back up the configuration file.
On the PC, an FTP user account has been created for the FTP client, with the username abc and the
•
password abc.
Command...
remotehelp [ protocol-command ]
verbose
debugging
connection."
Command...
disconnect
close
bye
quit
Figure
28, an IRF fabric consists of a master and a member switch. The member ID of
Remarks
Optional.
Optional.
Enabled by default.
Optional.
Disabled by default.
Remarks
Optional.
Equal to the close command.
Optional.
Equal to the disconnect command.
Optional.
Available in FTP client view, equal
to the quit command.
Optional.
Available in FTP client view, equal
to the bye command.
75