Table of Contents
Advertisement
When the backplane is connected to the SAS expander daughter card, all drive boxes are treated as a single box 1. This
means that the drive bay numbering is continuous.
Apollo DX2200 Gen10 Chassis and Apollo DX2600 Gen10 Chassis drive bay numbering
using the onboard SATA port connection in AHCI mode
•
The numbered callouts outside the front panel image refer to the server numbering.
•
The numbered callouts on the drive bays refer to the drive numbering.
Apollo DX2200 Gen10 Chassis with 1U servers in AHCI mode
Apollo DX2200 Gen10 Chassis with 2U servers in AHCI mode
Apollo DX2600 Gen10 Chassis with 1U servers
•
Each 1U server supports six drives.
•
NVMe drive is supported in:
◦
Server 1 – Drive bays 1-5, 1-6
◦
Server 2 – Drive bays 2-1, 2-2
16
Component identification
Advertisement
Table of Contents
