Networkservices Smtp Security; Networkservices Snmp Communityname; Networkservices Snmp Mode; Networkservices Snmp Systemcontact - Cisco Webex DX70 Administrator's Manual

Cisco Webex DX70 and DX80

Introduction

NetworkServices SMTP Security

Choose if and how to secure the communication between the device and the SMTP server.
This setting is used only if the device is registered to the Webex cloud service.
Requires user role: ADMIN
Default value: StartTls
Value space: None/StartTls/Tls
None: Connect to the SMTP server without encryption.
StartTls: Initially connect to the SMTP server without encryption, and then send a
STARTTLS command to upgrade to an encrypted connection (TLS).
Tls: Connect to the SMTP server over TLS (Transport Layer Security).

NetworkServices SNMP Mode

SNMP (Simple Network Management Protocol) is used by network management systems to
monitor and manage devices such as routers, servers, and switches, that are connected to
the IP network. SNMP exposes management data in the form of variables on the managed
devices, which describe the device status and configuration. These variables can then be
remotely queried, and sometimes set, by managing applications.
Requires user role: ADMIN, INTEGRATOR
Default value: Off
Value space: Off/ReadOnly/ReadWrite
Off: Disable the SNMP network service.
ReadOnly: Enable the SNMP network service for queries only.
ReadWrite: Enable the SNMP network service for both queries and commands.
D15362.17 DX70 and DX80 Administrator Guide CE9.14, OCTOBER 2020.
Configuration Peripherals Maintenance

NetworkServices SNMP CommunityName

Define the name of the SNMP community. The SNMP community name is used to
authenticate SNMP requests. If an SNMP request from a management system does not
include a matching community name (case sensitive), the message is dropped and the
SNMP agent in the video device will not send a response.
If you have the Cisco TelePresence Management Suite (TMS) you must make sure the same
SNMP community is configured there.
Requires user role: ADMIN, INTEGRATOR
Default value: ""
Value space: String (0, 50)
The SNMP community name.

NetworkServices SNMP SystemContact

Define contact information that SNMP servers can use.
Requires user role: ADMIN, INTEGRATOR
Default value: ""
Value space: String (0, 50)
String that describes the contact information for the video device.

NetworkServices SNMP SystemLocation

Define location information that SNMP servers can use.
Requires user role: ADMIN, INTEGRATOR
Default value: ""
Value space: String (0, 50)
String that describes the location of the video device.
www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
117
Administrator Guide
Device settings Device settings Appendices